Part Number 305-001
1,500.00 € HT
Contact us

The «IOT Box» provides a generic hardware platform with high connectivity to collect large amount of data in various scenarios and push them to historian database or IOT cloud using lightweight protocol such as MQTT



Type Xilinx Zynq-7020 All Programmable SOC
Architecture ARM Cortex-A9 Speed667 MHz
Cores 2
Operating system NI Linux Real-Time (32-bit)
Nonvolatile memory 512 MB, SLC NAND Flash
Volatile memory (DRAM) 512 MB, DDR3
Real-time clock Accuracy 5 ppm

Ethernet Support

Network interface 10Base-T, 100Base-TX, 1000Base-T Ethernet
Compatibility IEEE 802.3
Communication rates 10 Mbps, 100 Mbps, 1,000 Mbps auto-negotiated, half-/full-duplex

RS-232 Support

Maximum baud rate 230,400 bps
Data bits 5, 6, 7, 8
Stop bits 1, 2
Parity Odd, Even, Mark, Space
Flow control RTS/CTS, XON/XOFF, DTR/DSR, None

CAN Support

Maximum number of CAN interfaces 1
Maximum baud rate 1 Mbps
Minimum baud rate 10 kbps

USB Support

Number of interfaces  
USB Device 1
USB Host-only 1
USB interface USB 2.0, Hi-Speed
Maximum data rate 480 Mb/s per interface

Supported protocols

Ethernet TCP/IP, UDP, Modbus TCP, OPC, MQTT
Serial Modbus, VISA

SD Card support

Supported standards SD, SDHC
Read throughput 12.0 MB/s max
Write throughput 9.0 MB/s max

Power Requirements

The «IOT Box» requires a power supply connected to the power connector. Refer to Figure 2 for the location of the power connector.

Recommended power supply 55 W, 30 VDC max
Power supply voltage range 9–30 VDC1
IOT Generic platform for Industrial Big Data